Connectors

Although all Innovate Motorports products include connectors, some applications require more rugged and/or weather-resistant interconnect. The kits below allow you to custom wire a complete Innovate setup with weather Pack connectors. Simply remove the existing connectors (2.5mm TRS for example on the MTS serial connectors), a replace with these upgrade connectors. Tips:

• Plan your required connections in advance (including required gauges)
• Use multiple 2- or 3-position kits (each kit is one connection)
• Mark or reverse to avoid confusion (i.e. serial IN vs. serial OUT)
• Solder and heatshrink is always better than crimping
• Use non-conductive grease to avoid corrosion (optional)
  

WP218 - Weather Pack 2 position, 18 AWG. Kits includes male & female housing, terminals, and seals. Use this kit for every high current power connections (for example LC-1 Red and Blue wires). $5.40

WP222 - Weather Pack 2 position, 22 AWG. Kits includes male & female housing, terminals, and seals. Use this kit for normal connections (for example, anaolg outputs, CAL wires, etc.) . $5.70

WP322 - Weather Pack 3 position, 22 AWG. Kits includes male & female housing, terminals, and seals.Use this kit for all normal connections (for example, MTS serial IN and OUT, or anaolg outputs, system power and ground, etc.) As noted above, mark serial wires so you know which one is IN and which OUT $8.10

WPSK - Weather Pack Startup Kit #1. Crimper and Removal Tool. This one uses the Delphi "Cadillac" of Crimpers. $289

KITS - Race Tech Direct is offering special introductory kits that include Innovate Motorports products with the related Weather Pack connectors- FREE, click here for more info.